THERMOPLASTIC MATERIALS MOULDING WITH INJECTION PRESSES FROM 35 to 550 TONS.

From polymers to reinforced techno polymers, from metallic inserts to nontoxic materials for foods…

The moulding department boasts a range of injection presses from 35 to 550 tons equipped with driers for dehumidification of materials, robots for automatic handling of the moulded piece outside of the press and thermostats to guarantee constancy of the printing cycle. Setvis-Fisat is able to mould pieces in thermoplastic materials up to approximately 2.6 Kg in weight PS=1, also with metallic inserts in steel, brass, bronze or aluminum, produced by our own turning department.

sedi cuscinetti con accoppiamento ottenuto di stampaggio, senza  operazioni di ripresa
bearings housings with coupling
obtained through moulding
without any reformation operations

THERMOPLASTIC MATERIALS USED FOR MOULDING

The materials used for moulding are the most common; PS, ABS, PC, PA, POM, PMMA, PC-ABS, PP, PE, as well as techno polymers including PPS, PPA, PEEK, also reinforced with fiber glass, glass spheres, carbon, kevlar, minerals or mixed materials. Among the materials that Setvis-Fisat regularly moulds are also auto-extinguishing polymers, anti-static materials, UV resistant rays, nontoxic certified materials for foods.

also see the “showcase” | thermoplastic moulding

PHOTO GALLERY: SOME RESOLVED CASES

A series of items moulded with thermoplastic materials


VIDEOS EXAMPLES OF MOULDING WITH THERMOPLASTIC MATERIALS

A series of items moulded with thermoplastic materials

display videos

Prossimamente in questa sezione, i nostri filmati sullo stampaggio dei materiali termoindurenti.
(sopra, un filmato della nostra sezione Setvis-Fisat dental technology)